line Zoomin line
4330 Capacitance Meter news
  • Comprehensive measurement functions including DC resistance (Optional)
  • 0.05% basic accuracy
  • Frequency ragnes: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz, 1MHz
  • Fast measurement speed - up to 20 measurements per second
  • Drive level from 10mV to 2Vrms
  • Internal and external DC Voltage bias
  • RS-232 and USB interface
  • LCD Display, with easy-to-read characters
  • Protection against charged capacitors
  • Small size and light weight
4330 Capacitance Meter is specially designed for measuring the capacitors with the same comprehensive measurement functions as the popular 4300 series LCR Meters.
Accurate and fast measurements may be made in 1 kHz, 10 kHz, and 100 kHz making the 4330 the ideal choice for many applications in the test or production environments.
The 4330 model instrument may be externally controlled using the standard RS232 or GPIB interfaces.
Technical Specifications:
Measurement Function Any of the following parameters can be measured and displayed:
Impedance (Z)             Phase Angle (Ө)
Capacitance (C)           Dissipation Factor (D)
Inductance (L)             Quality Factor (Q)
AC Resistance (Rac)   Reactance (X)
Susceptance (B)          Conductance (G)
Admittance (Y)
Series/parallel equivalent circuit Any combination
Polar Form Z + Ө, Y + Ө
Frequency Range 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz
Frequency Steps 6 steps
Drive Level(AC measurements) 10 mV - 2 V
DC Bias Voltage Internal - 2 Vdc
External - up to ±40V may be connected via rear panel
Measurement Speeds Four selectable speeds for all measurement functions
Up to 20 measurements per second depending on test frequency and setup condition
Measurement Ranges Z, R, X          0.01 mΩ to > 1 GΩ
Y, B, G          0.1 nS to > 2 kS
L                    1 nH to > 2 kH
C                    0.01 pF to > 1 F
D, Q               0.0001 to 9999.9
Phase Angle -180 to +180
Rdc                0.1 mΩ to > 100 MΩ
Basic Accuracy (C): 0.05%
(D): 0.02%
Binning (Optional) User programmable PASS and FAIL bins. 25 way D-type interface connector.
Option /B1 (non-isolated) - Common 0V. Bin outputs 0 to 5V (nominal) with >10 mA current sink capability.
Option /B2 (isolated) - Common 24V input. Outputs 0 to 24V with >10 mA current source capability.
General Data:
Input Specification Power supply 90V AC to 264 V AC (Autoranging)
Mains frequency 47 Hz to 63 Hz
Display High contrast monochrome LCD module
320 x 240 with back lighting
Remote Control RS232 and GPIB (IEEE 488.2)
Measurement Connections 4 front panel BNC sockets
4-wire (Kelvin) measurements with screen at ground potential
Close This Window
Wayne Kerr Electronics - Address: 165L New Boston Street, Woburn, MA 01801-1744, USA
Telephone: +1(800)933-9319 Fax: +1(781)933-9523 Copyright © 2008 Wayne Kerr Electronics