tableline
tableline
line
line Zoomin line
line
4100 Series LCR Meters news
line
Features
  • 4110 20Hz - 100kHz
  • 4120 20Hz - 200kHz
  • 4150 20Hz - 500kHz
  • 41100 20Hz - 1MHz
  • Measurement from 20 Hz up to 1 MHz (41100)
  • 0.1% basic accuracy
  • 20ms measurement time
  • Parameters Z, Ө, Rac, C, D, L, Q, and Rdc (Option)
  • Drive level from 0.25V to 2Vrms
  • Can be externally controlled using the standard RS232, USB, or GPIB interface
  • +2V internal bias
  • Protection against charged capacitors
  • Small size and light weight
  • Unbeatable price
line
tableline
tableline
tableline
tableline
The 4100 series is the entry level range of Wayne Kerr LCR Meters. They provide a wide range of features and offer high performance and very competitive prices.
Technical Specifications:
Measurement Function Any of the following parameters can be measured and displayed:
Impedance (Z)             Phase Angle (Ө)
Capacitance (C)           Dissipation Factor (D)
Inductance (L)             Quality Factor (Q)
AC Resistance (Rac)
DC Resistance (Rdc) is an option (/R) on all models.
Series/parallel equivalent circuit Any combination
Polar Form Z + Ө, Y + Ө
Frequency Range 4110   - 20 Hz to 100 kHz
4120   - 20 Hz to 200 kHz
4150   - 20 Hz to 500 kHz
41100  - 20 Hz to 1 MHz
Frequency Steps 5 Hz     - 20 Hz to 1 kHz
50 Hz   - 1 kHz to 10 kHz
500 Hz - 10 kHz to 100 kHz
5 kHz   - 100 kHz to 1 MHz
Drive Level(AC measurements) Open circuit:                     0.25V, 0.5V, 1V, and 2V rms
Signal source impedance:   100Ω
Internal DC Bias Voltage 2 Vdc
Measurement Speeds Four selectable speeds for all measurement functions
Up to 50 measurements per second depending on test frequency and setup condition
Measurement Ranges Z, R, X          0.01 mΩ to > 1 GΩ
L                    1 nH to > 2 kH
C                    0.01 pF to > 1 F
D, Q               0.0001 to 9999.9
Phase Angle -180 to +180
Rdc                0.1 mΩ to > 100 MΩ
Basic Accuracy 0.1% varies with speed, frequency, AC drive level and impedance of device under test
General Data:
Input Specification Power supply 90V AC to 264 V AC (Autoranging)
Mains frequency 47 Hz to 63 Hz
Display 1/4 VGA (320 x 240) Black & White
Remote Control RS232, USB, GPIB
Measurement Connections 4 front panel BNC sockets with screen at ground potential
tableline
tableline
Close This Window
line
Wayne Kerr Electronics - Address: 165L New Boston Street, Woburn, MA 01801-1744, USA
Telephone: +1(800)933-9319 Fax: +1(781)933-9523 Copyright © 2008 Wayne Kerr Electronics